PMC High Die Cutter
Click photos for larger view
Overhauled by PMC then used lightly for 1-1/2 years before owner lost contract
----------------------------------------------------------------------------------------------------------------------------------------
Operation Overview
 |
Four-sided guiding system jogs and holds the stacks on all four sides during the die cutting operation for precise die cutting. |
|
Full control of stacks through feeding, guiding and die cutting eliminates manual jogging. |
|
Convenient adjustment of guides and die with clear view of die register on labels speeds set-up and reduces waste. |
|
Labels are safely loaded outside die cutting area. |
|
Typical uses: labels, note pads, credit cards, identification tags, postal cards, game cards, |
|
3-way trim, round cornering. |
| Materials: paper, plastic, vinyl, Mylar, paperboard. |
---------------------------------------------------------------------------------------------------------------------------------------
|
Specifications Model F Maximum Pre-cut Size 184mm x 184mm(7.25” x 7.25”) Minimum Pre-cut Size 32mm x 32mm(1.25” x 1.25”) Maximum Die Cut Size 178mm x 178mm(7” x 7”) Minimum Die Cut Size 25mm x 25mm(1” x 1”) Recommended Trim 3mm (1/8") all sides Stack Height Up to 102mm (4") Cycles per Minute 13
|
| Electric Requirements 3 hp, 2.2 KVA, 3-phase |
Model F
Very good condition-Available immediately
May be seen in operation
Complete with all spare parts, parts book and manual
Click photos for larger view